NovaStar VX1000

The VX1000 is an all-in-one processor and controller with 10 Ethernet outputs. It supports video controller, fiber converter and ByPass modes. One unit loads up to 6.5 million pixels, with a maximum width of 10,240 pixels and height of 8,192 pixels, meeting control requirements for ultra-wide, high-resolution LED displays.
The VX1000 receives and processes diverse video signals at up to 4K×2K@60Hz. It supports up to six layer resources, seamless output scaling, low latency and pixel-level brightness/chroma correction for excellent display quality.
The VX1000 also supports several control methods: front-panel knobs, NovaLCT, Unico software and a visual intelligent control platform, enabling intuitive, efficient operation.
With an industrial-grade chassis and powerful processing and transmission, the VX1000 adapts to complex sites. It is widely used for fine-pitch LED displays in mid- to high-end rental, stage control and engineering applications.
CE、FCC、IC、PSE、RCM、EAC、UL、CB、KC、RoHS
• Inputs: 1 × HDMI 2.0 (IN & LOOP); 2 × HDMI 1.3; 1 × optical fiber (OPT 1); 1 × 3G-SDI (IN & LOOP); 1 × USB 3.0 (for images/videos on USB storage).
Outputs: 10 Gigabit LAN ports, up to 6.5 million pixels, maximum width 10,240 / height 8,192. Two optical ports: OPT 1 transmits data for 10 LAN outputs; OPT 2 duplicates/backs up 10 LAN outputs. One HDMI preview output. One 3D output for direct connection to a third-party 3D transmitter.
Adaptive optical port: OPT 1 automatically switches between video input and sending-card output according to the connected device.
• Audio input/output: embedded HDMI audio input; separate 3.5mm audio input/output; adjustable output volume.
• Flexible cabling: no rectangular restriction on the load of a single LAN port. The overall screen bounding rectangle is supported within the device's load capacity. Contact technical support for compatible receiver cards.
• Low-latency output: with the low-latency switch on and ByPass mode enabled, output latency can be reduced to 0 frames.
Source synchronization: uses the device's video input source or an external Genlock source to synchronize output video.
• EDID management: supports EDID import and export.
• Save and recall scenes: store up to 256 custom scenes and recall them with one click; save, overwrite and delete scenes; preview layer layouts within scenes.
• Multi-layer display: supports up to six 2K × 1K layer resources; flexibly creates 4K × 2K, 4K × 1K or 2K × 1K layers (using 4, 2 or 1 2K resources respectively); independent layer sizing and positioning; adjustable priority and aspect ratio.
OSD: supports text and image overlays. Text options include static text, moving text, weather and time. Customize content, font, color, size, background and transparency; set scrolling direction, start position and speed.
• 3D support: conventional method—connect an EMT200 Pro emitter over LAN and use dedicated 3D glasses; new method—connect a third-party 3D emitter directly to the built-in 3D interface.
When 3D is enabled with side-by-side or top-and-bottom video formats, output capacity is halved.
Scaling modes: pixel-for-pixel, full screen and custom scaling.
Advanced video processing: SuperView III image technology, seamless output scaling, one-touch full-screen scaling and arbitrary input cropping.
• Image adjustment: brightness, contrast, saturation and hue.
• Pixel-level brightness and chromaticity correction: works with NovaLCT and the calibration platform to correct each LED, improving screen uniformity and display quality.
• USB drive playback: plug in to play immediately, saving time and effort.
Operating modes: video control, optical/electrical conversion, and ByPass.
• Controls: front-panel knob; NovaLCT software; Unico software (client/Web); visual intelligent control platform; optional remote control.
The remote control supports standby, screen on/off, brightness, volume, scene switching, USB playback settings, picture adjustment, layer-input switching and 3D settings. See the user manual for details.
Full-chain redundancy: device backup, input-source redundancy, Ethernet-port backup, fiber backup and dual receiving-card backup.
LAN backup testing: verify preset images and backup operation without unplugging LAN cables.
• Power-off setting retention: restores the previous settings immediately on power-up after either normal shutdown or an unexpected power outage.
• Passed 7 × 24-hour extreme high- and low-temperature tests, demonstrating stability and reliability.